Turbidity Assembly Flowfit CUA250
Brand: Endress+Hauser
Images are representations only.
Turbidity Assembly Flowfit CUA250
Brand: Endress+HauserFlowfit CUA250 is a process and flow assembly for turbidity measurement. Continuous in-line measurement of turbidity in aqueous media is used for real-time measurement of non-soluble substances in water for purposes of monitoring, detection of operating states and control applications.
Flowfit CUA250 is a flow assembly for use with turbidity sensors Turbimax CUS31 and CUS41. Typical applications are:
- Discharge monitoring in communal and industrial wastewater
- Sedimentation monitoring in wastewater treatment (coagulation and flocculation)
- Recycling of industrial service water
- Filter effluent and filter rupture monitoring
- Clear rinse cycle monitoring
- Flotation process monitoring
- Monitoring of closed circuits, e.g. cooling water and product pipelines
- Flow assembly featuring simple adaptation to standard piping
- Sensor orientation can be adapted to individual requirements of application
- Additional cleaning device employs spray cleaning to increase sensor maintenance intervals
- Flange adapter for standardized DN 50 flange installation
Specifications
Brand
Product Family
- Flowfit
Measuring Principle
- Single Beam Scattered Light
Application
- Waste water, industrial water
Installation
- Flow through holder for pipe or bypass installations
Characteristic
- Flow through holder for the turbidity sensors CUS31/41, blackened inside to minimize light reflexions
Design
- Flow through holder optional with spray head for a manual or automatic cleaning of the sensor head inside the holder with the cleaning device CUR3
Material
- Holder body: PVC
- Sealing: EPDM
Dimension
- Diameter: 100mm
- (3.94inch) Height: 196mm (7.64 inch)
Process Temperature
- max. 50°C (max. 122°F)
Process Pressure
- max. 6bar (max. 87psi)
Connection
- Mounting in GF DN50/d63-pipe
- Process connection: Screw type: DN20/d25
